سوئیچ دکمه ای ضد آب سیلیکونی

این سوئیچ لمسی با طول 6.2 میلی‌متر و عرض 6.3 میلی‌متر عرضه می‌شود، گزینه‌های ارتفاع متفاوتی دارد، دکمه لاستیکی سیلیکونی باعث می‌شود که بازخورد فشاری بی‌صدا داشته باشد، اندازه کوچک و ارتفاع سفارشی گزینه‌های بیشتری را برای طراحی محصول فراهم می‌کند.

ارسال درخواست

شرح

عملکرد و استفاده از سوئیچ تاکت ضد آب

1. The material choice,with the time increasing,the waterproof tact switch's material also would be oxidized and had not the waterproof protection as before,an then select the silicone rubber material is perfect option,whatever high temperature,damp cold environment,the waterproof tact switch can remain the waterproof property as before,and it will enhance the life expectancy of product.

2. The structure of waterproof tact switch design.the more high-end product,the

طراحی هوشمندانه تر. طراحی دکمه لمسی ضد آب برای صرفه جویی در فضا و مواد.

3. The hand feeling of waterproof silicone rubber tactile switch,it determines the sensitive of tactile button switch,the less reaction time will lead to more prior performance.

مقاومت در برابر محیط:

نه	موارد	Test conditions	الزامات
2.4.1	Resistance to low temperature	Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 h. Before measurements are made: 1)Temperature:-30±2 degree 2)Time: 96h	Contact resistance: 200mΩ MAX Insulation resistance: 50MΩ MIN Voltage proof: No dielectric breakdown shall occur. Operating characteristic variety Within ±10 percent of specified value . No remarkable corrosion shall be recognized in metal part.
2.4.2	Heat resistance	Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1h before measurements are made: 1)Temperature:80±2 degree 2)Time: 96h
2.4.3	مرطوب مقاومت	Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1h before measurements are made: 1)Temperature: 60±2 degree 2)Relative humidity: 90 to 95 percent 3) زمان: 96 ساعت
2.4.4	Change of درجه حرارت	After 5 cycles of following conditions, the sample shall be allowed to stand under normal temperature and humidity conditions for 1h and measurements shall be made. During the test waterdrops shall be removed. Temperature/ degree Time/hour1 cycle-10±22-1065165±2265-101
2.4.5	سولفوراسیون مقاومت	Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1h before measurements are made: 1)H2S gas concentrations: 3ppm±1ppm 2) زمان: 48 ساعت 3)Temperature: 40±2 degree (9095 percent RH)
2.4.6	Salt mist	The switch shall be checked after following test: 1)Temperature: 35 degree ±2 degree 2)Salt solution : 5±1 percent (solids by mass) 3)Time: 4±1 hour After test,salt deposit shall be removed by running water.